Electrocatalytic Reduction of CO2 to Ethylene by Molecular Cu‐Complex Immobilized on Graphitized Mesoporous Carbon

The electrochemical reduction of carbon dioxide (CO₂) to hydrocarbons is a challenging task because of the issues in controlling the efficiency and selectivity of the products. Among the various transition metals, copper has attracted attention as it yields more reduced and C2 products even while using mononuclear copper center as catalysts. In addition, it is found that reversible formation of copper nanoparticle acts as the real catalytically active site for the conversion of CO₂ to reduced products. Here, it is demonstrated that the dinuclear molecular copper complex immobilized over graphitized mesoporous carbon can act as catalysts for the conversion of CO₂ to hydrocarbons (methane and ethylene) up to 60%. Interestingly, high selectivity toward C2 product (40% faradaic efficiency) is achieved by a molecular complex based hybrid material from CO₂ in 0.1 m KCl. In addition, the role of local pH, porous structure, and carbon support in limiting the mass transport to achieve the highly reduced products is demonstrated. Although the spectroscopic analysis of the catalysts exhibits molecular nature of the complex after 2 h bulk electrolysis, morphological study reveals that the newly generated copper cluster is the real active site during the catalytic reactions.     

亲水性PET共混材料的制备及性能研究

以机械共混法制备亲水性聚对苯二甲酸乙二醇酯（PET）共混材料，并通过接触角测定仪、差示扫描量热仪(DSC)和电子万能材料试验机等对共混材料的亲水性能、热性能和力学性能等进行研究与分析。结果表明，亲水处理剂聚乙二醇（PEG）、聚丙烯酸钠（PAAS）、聚乙烯吡咯烷酮（PVP）均能改善PET的亲水性能，影响PET的结晶性能，但亲水处理剂对PET的力学性能影响较小，其中PET/PEG共混材料的亲水性最优；随着PEG含量的增加，PET/PEG共混材料的亲水性先逐渐增强，当PEG含量高于5 %后，共混材料的亲水性变化很小；且PET的结晶度随着PEG的加入呈现先增大后减小的趋势。     

养殖底泥制备腐植酸和生物炭及其氨氮吸附性能研究

以养殖底泥为原料,分别采用碱提酸解法和水热炭化法制备腐植酸和生物炭吸附剂,并以养殖水体中氨氮作为目标污染物,研究腐植酸和生物炭的氨氮吸附性能。结果表明:腐植酸和生物炭产率分别为3.86%和13.46%(以底泥湿基计),比表面积分别为11.54 m~2·g~(-1)和24.76 m~2·g~(-1)。准二级动力学方程能更好地拟合腐植酸和生物炭吸附氨氮的动力学特征。当腐植酸加量为2.00 g·L~(-1)、生物炭加量为3.00 g·L~(-1)时,其对氨氮的平衡吸附量增幅趋缓;当氨氮初始浓度分别增至150 mg·L~(-1)和200 mg·L~(-1)时,腐植酸和生物炭对氨氮的平衡吸附量增幅趋缓;生物炭比腐植酸表现出更强的吸附能力。该研究为养殖底泥的资源化利用及养殖废水的处理提供了参考。     

Within-class multimodal classification

Multimedia Tools and Applications - In many real-world classification problems there exist multiple subclasses (or clusters) within a class; in other words, the underlying data distribution is...     

关于提升电视专题节目制作质量的对策研究

在广播电视行业不断发展条件下,电视专题节目制作也受到受众高度重视。这就应提高电视专题节目制作质量,在满足广大受众日常观看要求同时,使得我国广播电视行业向着现代化方向发展。针对电视专题节目制作进行研究,首先阐述电视专题节目制作特点,之后阐述电视专题节目制作质量问题和相关提升对策。在解决电视专题节目制作问题同时,提升电视专题节目制作质量,继而彰显电视专题节目制作优势。     

Effects of hydrolysis of precursor on the structures and properties of polymer-derived SiBN ceramic fibers

In this paper, polyborosilazane precursor was synthesied from HMDZ, HSiCl₃, BCl₃ and CH₃NH₂ using a multistep method. By controlling the storage conditions, parts of the polyborosilazane fibers were hydrolyzed. FT-IR, NMR, XRD, TEM and monofilament tensile strength test were employed to study the effects of hydrolysis of precursor on the structures and properties of polymer-derived SiBN ceramic fibers. FT-IR and NMR results indicate that Si-N group in PBSZ reacts with H₂O to form Si-O-Si group. After pyrolysis reaction at 1400℃, Si-O-Si group will finally transformed into highly ordered cristobalite and β-quartz, resulting in formation of the wrinkled surface of the obtained SiBN ceramic fiber. The strip-like defects on fiber surface, according to monofilament tensile strength test, had a significant effect on mechanical property of the obtained SiBN ceramic fiber and caused no increase in fiber tensile strength of hydrolytic polyborosilazane fiber before and after pyrolytic process.     

水热晶化法制备RhCeZrLaNdOx催化剂及其性能研究

采用水热晶化法一步制备了RhCeZrLaNdOx系列催化剂，测定其比表面积、储氧量和还原温度等性能参数，并进行结构和形貌表征，研究了制备过程中水热晶化温度和时间、表面活性剂等条件对催化剂性能、结构和形貌的影响。结果表明，以月桂酸作为表面活性剂，在160℃水热晶化4 h制备的催化剂具有较大的比表面积、较高的储氧量和较低的还原温度，微观结构为四方相的固溶体纳米颗粒。与传统浸渍法制备的Rh/CeZrLaNdOx催化剂比较，水热晶化法制备的催化剂对CO还原NO具有更好的低温催化活性。     

不同矿区天然隐晶质石墨对天然橡胶性能的影响

选用两种不同矿区的天然隐晶质石墨材料,经过超细粉体制备研磨后用于天然橡胶,探究了不同矿区隐晶质石墨在天然橡胶中的溶解度和对性能的影响并研究了粒径和混合工艺对天然橡胶性能的影响规律。研究表明,不同矿区隐晶质石墨因集合体构成不同,在橡胶中的溶解度差异较大；粒径大小是影响橡胶性能的关键参数；混合工艺对橡胶性能的影响更为明显。